In 1, a light circuit debugging

Lighting circuit debugging is the key engineering debugging, lighting system relates to a device for the most, so must first concentrate on finishing it, need to prepare the instruments and tools: illuminance meter, meter, multimeter etc.

Debug process:

Separate from the silicon cabinet lights, gradually began to check circuit to the transmission case, the following are dimming units and Si cabinet debugging, for adjusting light platform mode can be classified, with dimming stage scenes, sequence program editing and other aspects of the content, can be based on manual debugging and design drawings, silicon counter also according to the manufacturer's instructions.

The stage lights debugging:

1, first of all should be carefully checked each device individually run, as far as possible in the system is connected or installed before the separate check of each equipment status, so do check and check the purpose of lighting console.

2, secondly to correct for lamp set

3, moreover is the lighting control device setting.

In 4, a final note is, in the above steps are completed, need to check the controller action and action consistency such lamps.